Protect Your Fluid Systems: Third Step to Winterize
by Tristian McCallion on Thu, Jun 20, 2024 @ 06:06 AM
Execution of an action plan for winterization should take place around July to September -- well before ambient temperatures start dropping. That means ticking off projects involving insulation, vents …
Protect Your Fluid Systems: Second Step to Winterize
by Tristian McCallion on Thu, Jun 13, 2024 @ 06:06 AM
Winterization in Alberta's industrial plants requires specific expertise because of the advanced technical challenges involved. Inspectors need an in-depth understanding of fluid dynamics affected by …
Protect Your Fluid Systems: First Step to Winterize
by Tristian McCallion on Thu, Jun 06, 2024 @ 06:06 AM
You have a long list of tasks that demand immediate attention. Can't preparing for low ambient temps wait? Possibly—it depends on the results of rigorously inspecting your fluid systems.
Compare Our Tube-in-Tube Coils to Pre-Packaged Sample Coolers
by Tristian McCallion on Thu, Apr 29, 2021 @ 09:04 AM
Did you know Edmonton Valve builds tube-in-tube coils (examples below) in sizes up to one inch tubing, in a wide variety of materials? And that our team is standing by help with all the flow, temp, an …
10 Tips on Steam Heat Exchanger and Tracing System Design
by Katie Reid on Fri, Dec 18, 2020 @ 10:12 AM
It's critical to know the operational characteristics of where the system will function. Not knowing can lead to choosing the wrong components. Read on for details, then please click through for info …
Whacky Alberta Weather Calls for Wise Winterizing
by Katie Reid on Thu, Oct 25, 2018 @ 15:10 PM
Low temperatures can mean ruptured tubing and other problems. Here are four free resources to help you winterize... and avoid crises.