GB Series Ball Valve Design
Click to expand image
GB Series Ball Valve Design
These versatile valves, with a flexible bolt pattern for various attachments, offer hydrostatic proof testing seals and bidirectional flow. They feature crimped end screws, preventing disassembly, and integral connections from 3/8 in. to 1 in., streamlining installation.
Low-E Valves Pass Extreme Tests
Click to expand image
Low-E Valves Pass Extreme Tests
Swagelok's general industrial and process interface valves meet stringent industry standards, including API 624 and API 641 for fugitive emissions, without needing design modifications. Choosing these valves ensures compliance with Low-E regulations and reliable process protection.
60 Series Ball Valve Design
Click to expand image
60 Series Ball Valve Design
Featuring a floating ball design, these valves ensure reliable sealing in high-pressure systems. Constructed with stainless steel, they provide high flow rates, low torque, and easy quarter-turn operation. Versatile end connections and handle options make them adaptable for various industries.
Atomic Layer Deposition (ALD) Valves
ALD valves offer extreme precision and consistency. UHP versions have ultrahigh cycle life with high-speed actuation, 0.27 to 1.7 flow coefficients, immersibility up to 392°F, and surface-mount, tube butt weld, and VCR® end connections.
Ball and Quarter-Turn Plug Valves
Our ball valves are designed for quick quarter-turn operation and leak-tight shut-off. They come in various sizes, materials, and configurations, making them suitable for a wide range of applications, from general purpose to specialized high-purity environments.
Bellow-Sealed Valves
Bellows valves are useful in both general and high-purity applications. Their packless design and welded seal prevent leaks. U Series valves, for example, feature a secondary containment system that prevents leaks to atmosphere even if the primary seal fails.
Check Valves
Swagelok inline check valves are available with both adjustable and set cracking pressures, suitable for managing back flow in standard and high-purity settings. Excess flow valves halt excessive downstream flow, boosting system reliability and safety.
Diaphram-Sealed
DL valves need just 1/4 turn to actuate from fully open to closed, and a position indicator ring shows visual confirmation. DS valves require approximately one and one-half turns from fully open to closed and have a flow coefficient of 0.30 for high-flow requirements.
Manifolds
We offer 2-, 3-, and 5-valve instrument manifolds. The 2-valve manifolds are for static pressure and liquid level applications; 3- and 5-valve are for differential pressures. Flow is controlled by a series of stainless steel needle valves, each with a specific function.
Needle & Metering Valves
These valves feature straight-pattern flow coefficients from 0.004 to 0.16; low- and high-pressure service; and brass and 316 stainless steel materials. Every metering valve is factory tested with nitrogen at 1000 psig, and shell tested.
.webp)
Process Interface Valves (DBB)
DBB valves enable smooth transition from process piping to instrumentation in a single configuration; with fewer connections, lower weight, and less space needed. Use them for isolation points, direct mount, close coupling, extreme service, and more.
Quick Connects
Our quick connects require no twisting, turning, or wrenching and come in single-end shutoff, double-end shutoff, and full-flow models. The QF Series has compact coupling and full flow without orifice restrictions, and its O-ring is easy to replace. Keyed quick-connects help prevent accidental intermixing of lines.
Relief Valves
Our R Series valves offer overpressure protection in general-industry applications with set pressures from 10 to 6000 psig. They open gradually as pressure rises and close when pressure drops below a set pressure. Others types can serve to vent signal line pressure.
Grab Sampling Modules
A key feature of the GSM is the switching valve that directs flow. Using the Swagelok 40G series ball valve for this switching valve, configurations are available with either 2 or 3 valves. This allows for simultaneous control of fluid routing, reducing the number of sequencing steps required to draw a sample.
Fluid Distribution Headers
Our fluid distribution headers have a main isolation valve and several outlets, each with its own isolation valve. As a distribution manifold, the header connects several users to the source of a utility fluid such as cooling water, steam, compressed air, or plant nitrogen.
Calibration & Switching Modules
Your custom calibration and switching module can be as simple as a ball valve and a stream selector, or include a host of inlet assemblies: gauge, filter, relief valve, and pressure regulator. We help you specify number of sample lines, calibration lines, type of flow control needed at the outlet, and more. We can include manual calibration too.
